Before activation: open the program
- Connect to the board and open
http://BOARD_IP:3000/uaslte/. - On the supplied hotspot, use
Uas_Lte, password12345abcde, then openhttp://192.168.77.1:3000/uaslte/. - On a router/LAN/VPN, replace BOARD_IP with the board’s address. ZERO 3E uses Ethernet unless a supported Wi-Fi adapter is configured.
Activation and trial: where to click
Raspberry Pi & Radxa — same sequence.
1 → 2 → 3: send your Device ID privately to Julliano, paste your matching UAS license, then activate and allow the board to restart. T is optional: start the included one-use 15-minute trial when you are ready. Opening the dashboard does not start it. A board restart ends the trial. Permanent activation remains available before or after the trial. Illustrated activation example. The Pocket camera licenses remain separate from the main UAS license.
Try the program — 15 minutes
- On the activation screen, press Trial UAS4g5gLTE. This starts the one-use trial; merely opening the page does not start it.
- Explore the full program during that session. When 15 minutes expire, the activation screen returns.
- Restarting the board ends the trial; it does not restart the timer. The trial cannot be started again through normal operation.
- A permanent license can still be entered after the trial expires. Pocket camera licenses are separate from the main UAS license.
Activate the main program permanently
- Copy the Device ID shown on the activation screen.
- Send it to Julliano privately to obtain the matching UAS license.
- Paste the complete license into Enter License and press Activate UAS 4G–5G LTE.
- Allow the board to restart, then reopen the same dashboard address.
- Confirm that the main Dashboard and program tabs are available.
The UAS license is tied to that board, is lifetime and has no subscription. Validation is local: no activation-server connection is required. Internet is still needed for remote 4G/5G use and software updates.
Pocket 1 / Pocket 2
These use separate dated camera licenses. A Pocket 1 license does not activate Pocket 2, or vice versa. Contact Julliano for camera activation/renewal. Entering phone mode alone does not prove the camera module is licensed.
Arrange your licenses
Contact Julliano privately with your Device ID and exact board model. Specify Pocket 1, Pocket 2 or both if required. Main licenses are permanent; Pocket module validity is arranged separately.
When purchasing two main UAS licenses, the second is offered at a 50% discount. Arrange the offer directly with EasyDrone.
If activation fails
check that the license matches this Device ID and was pasted completely. Do not reflash the image just because a license was rejected. Send the displayed result and board model privately to Julliano.