UAS4G5G LTE · START HERE

Choose reliable storage.

A clean image and a dependable card are the foundation of a stable companion computer.

THE CONNECTED FLIGHT PLATFORMv23Raspberry Pi
Radxa ROCK 4D
Radxa ZERO 3W / 3E
01

Choose by capacity and reliability

Use a genuine microSD card from a reputable supplier. Its actual capacity must be at least as large as the uncompressed image—not just the download archive. Two cards sold with the same nominal capacity can have slightly different usable sizes.

  • Check the image size before purchasing or writing the card.
  • An endurance-rated card is a useful option for repeated use; it does not replace verification.
  • A suitable card reader and reliable USB connection matter during flashing.
  • Keep a known-good copy of the original image before changing your setup.
02

Verify the write

Let the writing tool complete its verification stage. A successful copy alone does not prove that every block was written correctly. Safely eject the card after verification and a completed write.

If verification repeatedly fails, test another reader, USB port and card before investigating the application. Do not continue using a card known to produce corrupted writes.

03

Keep recovery simple

Store the original download and any supplied release notes on your computer. Later program updates are applied through the dashboard. Rewriting the SD card is intended for initial installation or recovery, not for every normal software update.

Program screenshotFull resolution ↗